$109.95
Sold Out
(1)
Select your colour

Calculate Shipping



Express Shipping - $0.00
Spend $50 or more and you get free shipping via Toll DX Express Australia wide. Toll DX Express "generally" take 24 hours from door to door and have "authority to leave" stickers. Toll cant deliver to Australia Post or PO Boxes, so if you have a PO box there will be a postage cost incurred. If you would prefer us to not use Toll, but Australia Post please leave us a note when checking out and you will still get postage for free.
Pickup - $0.00
Please select if you would prefer to pick your order up!

Powered by an advance AS chipset and housing dual 18650 batteries, the GeekVape Aegis Legend mod is able to fire up to 200W. It’s an awesomely durable mod constructed from six different  materials. Without any doubt, the Aegis Legend mod inherits the water proof, shock resistant and dust proof function from the original Aegis mod, and becomes even stronger. The GeekVape Aegis Kit also consists of an Aero Mesh sub ohm tank that uses mesh coils. It’s definitely the best choice for those vapers who want a strong and durable vape set up.

 

Features and Specs for GeekVape Aegis Legend Mod:

 

Shock Resistant

Water Resistant - IP67 Rating

Dust Resistant - IP67 Rating

Advanced AS Chipset

Dimensions: 58.5mm x 90.5mm x 30.6mm (Without Tank)

510 Threaded

Operating Wattage: 1.0 - 200.0W

Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Mode

Temperature Control: 100 - 315C / 200 - 600 F

Resistance Range: 0.05 - 3.00ohm

Stainless Steel, Aluminium, Zinc and Silicone Construction

Requires (2) High Amp 18650 Batteries (Sold Separately)

*We recommend an external charger for optimal charging*

Micro USB Charging Port

Firmware Upgradeable

 

Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.

 

Features and Specs for GeekVape Aero Mesh Sub-Ohm Tank:

 

Dimensions: 25mm x 45mm (Including Drip Tip and Threads)

Diameter: 25mm

510 Threaded

4.0ml e-Liquid Capacity

Top Fill Design With Twist Off Cap

Glass Tank

Dual Airflow Slots

Bottom Adjustable Airflow Control Valve

Utilises Aero Mesh Atomiser Heads for Variable Wattage

 

In the box:

 

1 x Aegis Legend MOD

1 x Aero Mesh Version Tank(4ml, Mesh Coil 0.2ohm pre-installed)

1 x Extra Glass Tube(5ml)

1 x IM4 0.15ohm coil head

1 x User Manual

Spare Parts

 

    

Batteries can be purchased here

 

Replacement coils can be found here

 

 

PLEASE NOTE - THE USB PORT IN THESE UNITS ARE INTENDED FOR EMERGENCY TOP UP CHARGE ONLY.  IT IS HIGHLY RECOMMENDED THAT YOU PURCHASE A BATTERY CHARGER TO CHARGE YOUR BATTERY EXTERNALLY OTHERWISE WARRANTY ON ANY DAMAGE TO THE USB PORT WILL BE NULL AND VOID.

 

 

(aegislegendkit)

SKU aegislegendkit
Shipping Weight 0.5000kg

Legend by name legend by nature

By: on 19 May 2018
Like the aegis 1 its a sturdy mod and hits good. It isnt as comfy in hand as the first aegis for me. I feel also that it drops off at 1/4 batts so need to recharge and cant run batts right out. Im a rebuilder and havent used a subohm for a while. Well the aero is what has bought me back to sub ohm tanks. I like the mesh coil. In general its a good mod and would be a great choice for work but a couple small issues stop a 5 star rating
(4)

Outstanding

By: on 15 May 2018
I thought I'd share my first impressions of the new Geekvape Aegis Legend kit with you guys and gals. It arrived yesterday and I've been using it non-stop for the last 24 hours, I've got to say I'm really liking this mod. I had some issues to start with. Inserting batteries for the first time actually tore one of the wraps. The battery insert tubes are very snug and the divider in the middle was not centred correctly, it has a coarse edge on one side and that ripped a gaping hole down the side of one of my wraps. A little fiddling sorted it out and it's fine now. Now onto the good stuff. This thing is rock solid, you can certainly tell it's been built well. The combination of leather, rubber, zinc, aluminium, and stainless steel is very hefty, the quality of the materials and the stitching/machining is outstanding. I haven't dropped it yet but I'm confident it'll easily survive a decent fall. I had it out in very heavy rain today and was vaping away without any issues, it handled it like a champ and didn't skip a beat. Looks-wise, I really like the styling. It's a bit more subdued than some other mods out there but still has some nice highlights, and that suits my tastes very well. I went for the stealth black finish but there are a few to choose from. It feels excellent in the hand, the rounded leather side of the mod is perfect for gripping into your palm and using your index finger to pull the fire key on the other side. The buttons are perfectly situated and feel very natural to use, the fire key has a slight radius to it and feels perfect for your finger. It's heavy but that's to be expected from a mod that's built to withstand drops. The display is nice and bright and you can adjust the brightness level. You have three different colour schemes for the screen: grey/blue, blue, and red. The interface is easy to use and you get all the usual modes: power, temp control (SS, titanium, nickel, TCR), VPC, and bypass. The button combos are much like on any other mod and are easy to remember. It boots up quickly in about 1.5 seconds. How does it actually vape? Quite well! The new Geekvape AS chip in this mod is really good. It's well ahead of previous Geekvape chips that I've tried, fire time is quicker and it hits harder. Compared to the Gene chip it's still a little bit of a step down; it does fire quickly but maybe not quite as fast as the Gene, vaping at the same wattage as the Gene feels ever so slightly less powerful but it's pretty damn close. All in all I really like the way this thing vapes, I haven't felt the need to pick up my Drag all day, that's just sitting in the cupboard. Money very well spent in my opinion!
(5)

Write a product review