$59.95
In Stock
Select your colour

Calculate Shipping



Express Shipping - $0.00
Spend $50 or more and you get free shipping via Toll DX Express Australia wide. Toll DX Express "generally" take 24 hours from door to door and have "authority to leave" stickers. Toll cannot deliver to Australia Post Shops, Parcel Lockers or PO Boxes and shipment to any of these locations will incur postal charges. If your order and your address qualifies for free shipping but you would prefer us to not use Toll, please select the free shipping option and leave us a note when checking out requesting it be sent via Australia Post
Pickup - $0.00
Please select if you would prefer to pick your order up!

Eleaf once again returns with one of their classics, the iStick Pico X, now available with a more up-to-date chip and chassis. Along with the Pico X is the MELO 4, a 22mm Sub-Ohm tank that utilises the EC-M coil head. The Pico X maintains the small and compact form factor while adding a new and modernised minimalistic design. Located on the top is a threaded cap for the battery insert and a stainless steel 510 threading that can accommodate 22mm base diameter atomisers. Users can go from 1W to 75W with the Pico X, perfect for any type of mesh coils to be used on.

 

The iStick Pico X and MELO 4 is a new starter kit brought to you by Eleaf. The Pico X is capable of 1 to 75W with a 0.1 to 3.0 ohm atomiser resistance range. Multiple modes can be accessed through the Pico X such as the standard Variable Wattage mode, but Bypass and a full temperature control suite. A single 18650 battery is housed through a threaded top battery cover located on the top of the device. The OLED screen displays valuable information for vapours such as atomiser resistance, wattage output, battery life, and a puff counter. The Melo 4 Sub-Ohm Tank that comes with this vape kit is a 22mm tank that utilises the EC-M Coil Head. The MELO 4 is capable of accommodating 2ml of e-liquid and can be easily filled through a push to open top system which is guided with an arrow on the top of the tank. Inside the MELO 4 is the EC-M mesh Coil Head, rated at 0.15 ohm  and rated at 30 to 75W. Airflow enters the MELO 4 through a 6mm by 2mm adjustable airflow slots located on the bottom.

 

The Eleaf iStick Pico X Starter Kit is a welcoming device for beginners, accommodating an easy to use functionality while maintaining a sleek and beautiful design.

 

Pico X Specs:

 

1 to 75W

0.1 to 3.0 ohm Atomiser Resistance Range

0.5 to 9V Output Voltage

Bypass Mode

Output Based on Resistance and Battery State

On and Off Capable

0.1 to 3.0 ohm Atomiser Resistance Range

Temperature Control Suite

Nickel Support

Titanium Support

SS Support

TCR (M1, M2, M3)

0.05 to 1.0 ohm Atomiser Resistance Range

Threaded Top Battery Cover

Fits a Single 18650

18650 Battery Sold Separately

0.91 Inch OLED Screen

Temperature Mode and Output

Output Power

Atomiser Resistance

Battery Life Indicator

Output Voltage

Stealth Mode

Classic Form Factor

Three Button Control Interface

Oversized Firing Button

Adjustment Buttons Located on the Bottom

Micro USB Charging Port

2A Quick Charge

Firmware Upgradeable

Stainless Steel 510 Threading

Accommodates Up to 22mm Atomiser Diameter

Gold Plated Contact

Over-Charge Protection / Over-Discharge Protection / Over-Current Protection / Reverse Polarity Protection / Over 10S Protection / Short Circuit Protection

Product Dimension:

50mm by 31mm by 112mm

 

Melo 4 Specs:

 

22mm Diameter

Sliding Top Fill System

Slides Open and Shut

Fill Port

2ml Max Capacity

Eleaf EC-M Coil Family

EC-M Coil Head

0.15 ohm

Mesh Coil

Kanthal

30 to 75W Recommended Output Range

Dual Adjustable 7mm by 2mm Air Slots

Proprietary 6.5mm 510 Bore Delrin Drip Tip

Stainless Steel and Glass Construction

(picox)

SKU picox
Shipping Weight 0.3000kg

Be The First To Review This Product!

Help other Vape4life users shop smarter by writing reviews for products you have purchased.

Write a product review